Rotor and Tube Holders Included
DASH Flex 6
Programmable STAT Centrifuge
Max Speed: 5400 RPM / 4150 xg
Max Capacity: 6 (up to 16 x 100 mm or 10 mL)
Dimensions (W x D x H): 12 x 14 x 9 in (30.5 x 35.6 x 22.9 cm)
Weight: 12 lbs (5.4 kg)
Warranty: 2 years
- Monitor time remaining on the digital display
- Program up to 10 custom time and speed settings
- LED lid lighting indicates cycle status
- Designed, built, and supported in the USA
$2,813.00
Ask your preferred distributor about purchasing the new DASH Flex 6, or call 1-866-265-1486 for volume pricing.
Easy to Use
The simple interface makes it easy to select settings on the fly, or use one of three pre-programmed common lab settings. Spin 6 tubes up to 16 x 100 mm or 10 mL in the same holder.
Easy to Monitor
Engineered for Safety
Replace your StatSpin™ with a DASH centrifuge
Discover what sets Drucker Diagnostics’ DASH STAT centrifuges apart from StatSpin. The DASH series is designed to outperform its competitors with greater reliability, unbeatable customer service, and enhanced efficiency, making it ideal for high-demand hospital environments.
Unique Features
Drucker Diagnostics’ DASH Flex 6 introduces the flexible controls and digital display of the best-selling DASH Flex 12 to a smaller body, saving you valuable bench space and allowing you to customize cycle parameters based on your IFUs and unique validation needs. Set and save up to 10 programmable time, speed, and g-force settings using the user-friendly interface. The DASH Flex 6 arrives pre-programmed with the most common STAT settings and can spin 6 tubes up to 16 x 100 mm or 10 mL with the same rotor and universal tube holders. The patented swing-out horizontal rotor is compatible with recommended IFUs for all common tube manufacturers, including Greiner and BD.
- Capacity – Up to six (6) tubes
- Tube Sizes – Up to 16 x 100 mm or 10 mL
- Digital Display – Clearly see your custom parameters and the time left in each cycle
- Fully Programmable – Easily set and save up to 10 custom time, RPM, and g-force settings
- Brushless DC Motor – Years of operation with no routine maintenance
- 2-Stage Horizontal Rotor – Drucker Diagnostics’ patented swing-out horizontal rotor design produces ideal horizontally separated samples
- Cool Operation – Unique design of the convection based cooling system protects the samples even under the heaviest workloads
- Automatic Lid Lock – Centrifuge will not run with the lid open and the lid cannot be opened while samples are spinning
- Positive Lid Latching – Firm mechanical latching of the lid prevents the escape of debris
- Clear Shatter Proof Lid – Allows for safe sample observation and optical calibrations
- Reinforced Guard Bowl – Provides maximum safety and durability
- Regulatory Approvals – Certified to US, Canadian, and European Safety regulations and standards
- Dimensions (W x D x H): 12 x 14 x 9 in (30.5 x 35.6 x 22.9 cm)
- Weight – 12 lbs (5.4 kg)
- Max. Acceleration Time – 20 Seconds
- Max. Deceleration Time – 20 Seconds
- Factory Setting Range – 1 to 30 Minutes (± 1%)
- Voltage – 100 – 240 (+/- 10%)
- Frequency – 50/60 Hz
- Max. Power Requirements – 220 Watts
Preset 1: 3 minutes / 5300 RPM / 4000 xg
Preset 2: 5 minutes / 5300 RPM / 4000 xg
Preset 3: 10 minutes / 3800 RPM / 2000 xg
Centrifuge Accessories
Manuals & Literature
DASH Flex 6 Operator’s Manual (English)
What is the warranty on Drucker’s centrifuges?
Drucker Diagnostics provides a two (2) year parts and labor warranty.
Will I need to purchase accessories for the centrifuge separately?
All of our centrifuges are sold complete with the rotor and tube holders. No additional accessories are necessary though there are additional options available for purchase.
How often should my centrifuge be calibrated?
Drucker Diagnostics recommends the centrifuge be calibrated every 2 years or 5,000 cycles.
What should be used to clean and disinfect the DASH Flex 6?
ONLY isopropyl alcohol, soap and water, or a 10% (5,500 PPM) bleach solution should be used for cleaning and disinfection of the centrifuge and accessories. All surfaces must be dried immediately after cleaning and disinfecting.
What cleaning solutions should be avoided?
TBQ Germicidal products should not be used as they will cause damage to the centrifuge and void the warranty. The use of fully/partially halogenated hydrocarbons, ketones, esters, ethers, benzyls, ethyl benzenes, and all other chemicals not prescribed by Drucker Diagnostics should not be used as they may cause damage to the rotor chamber, rotor, tube holders, accessories, and centrifuge exterior. If this occurs the warranty will be voided.
Related Products
Want to learn more? Request more information
"*" indicates required fields