Alvedia TrueBond

Rotor, Tube Holders, and Inserts Included

Alvedia TrueBond

Multipurpose Veterinary Centrifuge

Max Speed: 3800 RPM / 2000 xg
Max Capacity: Blue tube holder – 6 x 75-100 mm (3-10 mL), red tube holder with transparent adapter – 12 x Gel Test
Dimensions: 12 x 14 x 9 in (30.5 x 35.6 x 22.9 cm)
Weight: 12 lbs (5.4 kg)
Warranty: 2 years
  • Horizontal rotor
  • Dedicated for Alvedia Gel Technology, the human gold standard for animal care
  • Use validated cycles for Gel Test procedure and default presets or program your validated cycles
  • Compact design requires just 1.35 ft² (1,254 cm²) of counter space
  • Designed, built, and supported in the USA

$606.10

R

One Centrifuge, Any Tube

Spin everything you need on one centrifuge – blood separation, gel test, RBC washing, chemistry, coag, PPP, and urine.

R

Fits In Your Space

Space is at a premium in your clinic. Enjoy a centrifuge with a small footprint of just 1 square foot, giving you the performance you need without the clutter.
R

Reliable Quality & Value

Your Alvedia TrueBond works hard to make your life easy. Enjoy years of workhorse performance with no maintenance.

The Alvedia TrueBond veterinary centrifuge is designed for Alvedia Gel Technology, the human gold standard for animal care. It uses validated cycles for the Gel Test procedure and offers default presets or the flexibility to program your own validated cycles. The TrueBond is ideal for blood separation, gel testing, RBC washing, chemistry, coagulation, PPP, and urine applications.

Dimensions: 12 x 14 x 9 in (30.5 x 35.6 x 22.9 cm)

Weight: 12 lbs (5.4 kg)

Power: 100 – 240 (+/- 10%) – 50/60 Hz

Factory Range Setting: 1 to 30 Minutes (± 1%)

Cycle 1 (Blood Separation): 3 min / 3200 RPM

Cycle 2 (Gel Test): 10 min / 1500 RPM

Cycle 3 (RBC Wash): 2 min / 3000 RPM

Cycle 4 (Chemistry): 10 min / 3600 RPM

Cycle 5 (Coag): 15 min / 3300 RPM

Cycle 6 (Urine): 5 min / 1900 RPM

What is the warranty on Drucker’s centrifuges?
Drucker Diagnostics provides a two (2) year parts and labor warranty.

How often should my centrifuge be calibrated?
Drucker Diagnostics recommends the centrifuge be calibrated every 2 years or 5,000 cycles.

What should be used to clean and disinfect the TrueBond?
ONLY isopropyl alcohol, soap and water, or a 10% (5,500 PPM) bleach solution should be used for cleaning and disinfection of the centrifuge and accessories. All surfaces must be dried immediately after cleaning and disinfecting.

What cleaning solutions should be avoided?
TBQ Germicidal products should not be used as they will cause damage to the centrifuge and void the warranty. The use of fully/partially halogenated hydrocarbons, ketones, esters, ethers, benzyls, ethyl benzenes, and all other chemicals not prescribed by Drucker Diagnostics should not be used as they may cause damage to the rotor chamber, rotor, tube holders, accessories, and centrifuge exterior.
If this occurs the warranty will be voided.

Easy-swap inserts allow you to spin your most common tubes.
Compact size fits easily on crowded counters
Designed for the unique needs of vets and veterinary practices

Want to learn more? Request more information