DASH Coag STAT Centrifuge
- Max Speed (RPM): Up to 6600 RPM
- Max Speed (RCF): Up to 4400 xg
- Max Capacity: 12 samples up to 10 mL
- Dimensions (WxDxH): 12 x 14 x 9 in (30.5 x 35.6 x 22.9 cm)
- Weight: 17 lbs (7.7 kg)
- Warranty: 2 Years (Extended Available)
Ready to use, right out of the box
$4,076.64
Designed, built, and supported in the USA
Ask your preferred distributor about purchasing the DASH Coag STAT Centrifuge , or call 1-866-265-1486 for volume pricing.
What makes it different?
- Delivers STAT coag and PPP samples in as little as 2 minutes.
- Features a redesigned fixed angle rotor to support high-throughput STAT testing.
- Meets increased demand with larger 10 mL tube compatibility.
Preset Cycles
2 minutes / 6600 RPM / 4400 xg
3 minutes / 6600 RPM / 4400 xg
5 minutes / 5200 RPM / 2700 xg
Applications
- Microtube Samples
- PPP / Coag
- STAT Processing
Tubes Most Often Used
Easy to Use
The simple interface makes it easy to select settings on the fly, use one of three pre-programmed settings for clinical lab applications, or lock to a single cycle.
Reduce Turnaround Time
Eliminate wait time by using a centrifuge array in accessioning to eliminate queuing. The array takes advantage of DASH’s compact size to allow samples to be spun as soon as they arrive.
Extended Coverage
All Drucker centrifuges are eligible for 1, 2, or 3-year extended warranty coverage. Purchase within 90 days of your original ship date to extend your protection.
Unique Features
The DASH Coag has been redesigned to accommodate larger tube sizes and higher STAT workloads. Now capable of spinning 12 tubes up to 16 x 100 mm or 10 mL, its fixed angle rotor reaches a max speed of 6,600 RPM (4,400 xg) to produce accurate coag and PPP samples in as little as 2 minutes. Choose from three preset cycles or lock to a single validated setting to reduce user error. The DASH Coag is compact, easy to use, and integrates seamlessly into existing STAT workflows.
Features
- Out of Box Capacity: 12 samples up to 10 mL
- Tube Sizes: Up to 16 x 100 mm or 10 mL
- Configurable Capacity: 12 samples up to 2 mL (with adapters sold separately)
- Fixed Angle: The rotor remains at a 45° angle during sample processing
- Clear Shattered Proof Lid: Allows for safe sample observation and optical calibrations
- Reinforced Guard Bowl: Provides maximum safety and durability
- Electrical Certifications: Certified to US, Canadian, and European Safety regulations and standards
- Warranty Coverage: 2-year standard warranty, extended warranties available for purchase within 90 days of original ship date
Specifications
- Dimensions (WxDxH): 12 x 14 x 9 in (30.5 x 35.6 x 22.9 cm)
- Weight: 17 lbs (7.7 kg)
- Factory Settings Range: 1 to 30 Minutes (± 1%)
- Voltage: 100 – 240 (+/- 10%) VAC
- Frequency: 50/60 Hz
Product Downloads
Frequently Asked Questions
Drucker Diagnostics provides a two (2) year parts and labor warranty. 1, 2, and 3-year extended warranties are available for purchase within 90 days of your centrifuge’s original ship date.
All of our centrifuges are sold complete with the rotor and tube holders. No additional accessories are necessary though there are additional options available for purchase.
Drucker Diagnostics recommends the centrifuge be calibrated every 2 years.
ONLY isopropyl alcohol, soap and water, or a 10% (5,500 PPM) bleach solution should be used for cleaning and disinfection of the centrifuge and accessories. The centrifuge must be unplugged and all surfaces must be dried immediately after cleaning and disinfecting.
TBQ Germicidal products should not be used as they will cause damage to the centrifuge and void the warranty. The use of fully/partially halogenated hydrocarbons, ketones, esters, ethers, benzyls, ethyl benzenes, and all other chemicals not prescribed by Drucker Diagnostics should not be used as they may cause damage to the rotor chamber, rotor, tube holders, accessories, and centrifuge exterior. If this occurs the warranty will be voided.
Request More Information
Have a question about our centrifuges or need to be connected with a distributor representative? Our team is here to answer your questions, discuss partnership opportunities, and provide the information you need. We’re ready to help you get started and support you every step of the way.
"*" indicates required fields
Don’t Let Unsupported Equipment Disrupt Your Lab
Related Articles & Resources
When a clinical lab evaluates a new 24-place centrifuge, the spec sheet is only part of the picture. Maximum speed matters, and so does the range of tubes a single centrifuge can spin, what comes in the box, and the service team behind it. This guide compares the Drucker Diagnostics all-new DASH 24 with three […]
Read More
Yes, and it happens more often than most laboratories recognize. Centrifugation sits at the boundary between specimen collection and analysis, which means errors there are classified as preanalytical and are often invisible by the time a result leaves the laboratory. The sample looks processed. The analyzer ran. The number printed. But if the centrifuge step […]
Read More
Drucker Diagnostics offers a 24-place centrifuge for clinical labs that need to process high sample volumes in a compact footprint. With the DASH Flex 24 now discontinued, the two current options are the all-new DASH 24 STAT centrifuge and the HORIZON 24 FLEX routine centrifuge. While all three spin samples using a horizontal rotor, they […]
Read More
If your lab is using multiple centrifuge models to manage all of your applications, you’re dealing with the operational overhead that comes with it: separate validation records and SOPs, rotor inventories, and competency requirements for every operator on every model. The all-new DASH 24 STAT centrifuge offers a solution. With a 24-tube capacity, maximum speed […]
Read More