HORIZON 6

Routine Centrifuge for Standardization and Simplification

  • 6 Tube Capacity
  • Horizontal Centrifugation
  • 3 Cycles Preset for Chemistry, Coag/PPP, and PRP/Urine
  • LED Lid Lighting Indicates Cycle Status
  • UL/CE Safety Approved
  • 2,000 xg Max RCF
  • 2 Year Warranty

HORIZON 6

Routine Centrifuge for Standardization and Simplification

  • 6 Tube Capacity
  • Horizontal Centrifugation
  • 3 Cycles Preset for Chemistry, Coag/PPP, and PRP/Urine
  • LED Lid Lighting Indicates Cycle Status
  • UL/CE Safety Approved
  • 2,000 xg Max RCF
  • 2 Year Warranty

HORIZON 6

Routine Centrifuge for Standardization and Simplification

  • 6 Tube Capacity
  • Horizontal Centrifugation
  • 3 Cycles Preset for Chemistry, Coag/PPP, and PRP/Urine
  • LED Lid Lighting Indicates Cycle Status
  • 2,000 xg Max RCF
  • 2 Year Warranty

Product Specifications

HORIZON 6 Preset Cycles

HORIZON 6, 12, and 24 Manual Operator’s Manual for Drucker’s HORIZON Series

HORIZON 6, 12, and 24 Product Data Sheet (English)

HORIZON 6, 12, and 24 Product Data Sheet (International)

HORIZON 6 Features

The HORIZON 6 routine centrifuge features a user-friendly, two-button interface that allows you to program your own validated cycles. Three (3) preset cycles make it easier than ever to switch between plasma, serum, and urine specimens. The illuminated lid lighting displays the centrifuge’s status at a quick glance and indicates if it is ready to run, currently running, or finished. Standardize the whole lab with the flexibility of the HORIZON 6 to simplify work flows, training, warranty, and service.

  • Spin up to six (6) tubes (1 to 10 mL, up to 17 x 75 & 100 mm)
  • Choose from three (3) preset cycles for chemistry, coag, and urine
  • Patented LED lid lights easily indicate the cycle status
  • Produce ideally separated samples with the 2-stage horizontal rotor
  • Keep specimens at a safe temperature using the unique convection based cooling system
  • Automatically locking, shatterproof lid prevents the centrifuge from running when the is lid open
  • Reinforced guard bowl for maximum safety and durability
  • Quiet operation with a sound level of just 64 dBA
  • Certified to US, Canadian, and European safety standards
  • Rotors and tube holders are included

Accessories

Frequently Asked Questions

What is the warranty on Drucker's centrifuges?
Drucker Diagnostics provides a two (2) year parts and labor warranty (except the rotor – see question below).
What is the warranty on the rotor?
All rotors carry a lifetime warranty. Should the rotor ever fail, for as long as you own your centrifuge, Drucker Diagnostics will replace it free of charge.
Will I need to purchase accessories for the centrifuge separately?
All of our centrifuges are sold complete with the rotor and tube holders. No additional accessories are necessary though there are additional options available for purchase.
How often should my centrifuge be calibrated?
Drucker Diagnostics recommends the centrifuge be calibrated every 2 years or 5,000 cycles.
What should be used to clean and disinfect the HORIZON 6 routine centrifuge?
ONLY isopropyl alcohol, soap and water, or a 10% (5,500 PPM) bleach solution should be used for cleaning and disinfection of the centrifuge and accessories. All surfaces must be dried immediately after  cleaning and disinfecting.
What cleaning solutions should be avoided?
TBQ Germicidal products should not be used as they will cause damage to the centrifuge and void the warranty. The use of fully/partially halogenated hydrocarbons, ketones, esters, ethers, benzyls, ethyl benzenes, and all other chemicals not prescribed by Drucker Diagnostics should not be used as they may cause damage to the rotor chamber, rotor, tube holders, accessories, and centrifuge exterior. If this occurs the warranty will be voided.

Compatible With –

Designed, built, and supported in the USA